Kreslavsky IT blog » “The Integrated Remote Console is unavailable; it is already in use by a different client.”

This is Common problem in HP server blades default configuration. The default setting locks ILO and you see that message till you reset ILO.

To fix the problem go to Problematic Blade >ILO >Web administration

Remote console>Settings and change Remote Console Acquire to Enabled

You may also like -

HP Blade Power Supply # Status has changed to: UnknownIf you experience such problem .For example" Enclosure, "1", has detected that a power supply in bay 6 has changed from status OK to ...

How to Change and set Default Windows Installation PathUnusually Operating System is installed on C drive and whenever you install new program it goes to C:Program Filesprogram name I is because the ...

Exchange 2007 Toolbox Work CenterThe Toolbox work center that is found in the Exchange 2007 EMC is a new concept for Exchangemanagement tools. The Toolbox work center from ...

Connection to the cluster is not allowed since you are not an administrator on the cluster node – ...You may experience such error while opening “Failover Cluster management console” It usually happens when server service is in stoped state. In order to ...

Hello there! If you are new here, you might want to subscribe to the RSS feed for updates on this topic.

duncan says:

June 22, 2008 at 11:51 am

This saved me a lot of trouble.
thanks very much!
Duncan

Gil Kreslavsky says:

July 9, 2008 at 1:08 pm

Your welcome.
Always happy to help

kbgeoff says:

December 4, 2008 at 6:27 am

I’m running a DL360, not a blade, but my iLO kept saying that message all the time. I went into the network properties of the iLO web admin, swapped the DNS settings and hit Apply. That forced a reset of iLO and I was back in business. Thanks for pointing me in the right direction!